The Paragon square CS-26 digital clamshell kiln is easy to load, because the top and walls lift out of the way, giving you full access to the kiln bottom. Assemble glass projects directly onto a shelf inside the kiln. Add stringers and glass frit to delicate designs. Since you can assemble pieces without having to move them before firing, you can often do away with glue. After the kiln shelf is loaded and you are ready to fire, lower the kiln top.
The CS-26T top lifts away to give access to the shelf area. Air pistons assist in lifting the top.
The elements in the top and sides are mounted in pinless element grooves. Since the groove opening is narrower than the element coil, the elements stay in place without pins. This is one more reason your CS-26T will give you hassle-free firing. Enjoy the improved heat distribution of an optional side element, which is mounted in the top section of the kiln sidewalls.
Electrical components are mounted inside the base of the kiln. Costly heavy-gauge nickel-plated copper wiring is covered with high temperature glass-braided insulation. The thermocouple, which senses temperature inside the kiln, is protected with a high-nickel stainless steel sheath for long life. The CS-26T uses the digital 12-key Sentry 2.0 controller.
A mercury relay is standard on this kiln. The relay sends power to the elements on command from the digital controller. The mercury relay in the CS-26T is industrial-grade and far outlasts mechanical relays. The life of the quiet, reliable mercury relay has been measured in millions of on/off cycles.
Interior dimensions: 26 inches wide x 26 inches long x 13 1/2inches deep (top to bottom of chamber)
220 volts
Add-on items :
Lid Safety Switch
