The Pearl-18 is packed with exciting features. The top lifts away to give access to the shelf area from three sides. Air pistons assist in lifting the top. You can place the Pearl on a table without an extra stand.
The elements in the top are mounted in pinless element grooves. Since the groove opening is narrower than the element coil, the elements stay in place without pins.
Electrical components are mounted inside the base of the kiln. The Pearl-18 uses the digital 3-key Sentry Xpress controller.
The reliable Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Speed and 8-segment Ramp-Hold.
The firing chamber is 18.00 inches wide x 18 inches deep x 8.5 inches high.
A fiber top and stand, with and without casters are available as add-on options.
This kiln qualifies for $149 flat rate shipping within the the continental United States and includes residential delivery and lift gate service when needed. Your phone number must be provided for delivery notification. Delivery does not include uncrating or kiln setup and placement. Additional rare restrictions may apply.
Add-on items :
Fiber Top
Stand
Stand with Casters
